Smart Swim 2 PRO does not have any anti-fog coating on the lens, due to the use of Corning® Gorilla® Glass 3 for scratch and damage resistance. This means that an anti-fog spray must be applied before each swim. 

With your purchase of Smart Swim 2 PRO, you will receive:

• 1 bottle of ready-to-use anti-fog solution which should last around 35 swims.
• 1 bottle of concentrate which should last around 140 swims.

Using the spray

1. Spray

Spray the anti-fog solution on each lens.

1 spray in each lens, enough liquid to cover the lens in step 2.

2. Rub

Use your fingers to evenly distribute the solution around the inside of the lens cup.

Ensure that there is anti-fog solution all over the lens.

3. Rinse

Dunk your goggles in water to remove excess solution. 

Be careful to not rinse them so thoroughly that you completely remove the solution you just applied. 

Notes:

• We recommend applying the anti-fog right before your swim, or as close to starting your swim as possible.

• Removing your goggles and putting them on your head while you rest may result in humidity build-up which may impact the performance of the anti-fog.

   

Using the concentrate

1. When your spray bottle is empty, add 1 part of the concentrate to the bottle

2. Add 3 parts of water to the bottle and mix gently.

    

When you run out of concentrate

You can use any baby shampoo (which is what the spray in the packaging is) and perform the same steps.